files/UPO2000HD2.png
files/UPO2000HD1.png
files/UPO2000HD3.png

UPO2104HD high-resolution oscilloscope

Variants

Excl. VAT: Excl. VAT €1.029,00

Bandwidth: 100 MHz
Channels: 4 Analog
Real-Time Sample Rate: 2.5 GSa/s
Memory Depth: 100 Mpts
Waveform Capture Rate: 1,000,000 wfms/s
High Vertical Resolution: 12-bit ADC
Large Touchscreen Display with Intuitive UI
Advanced Triggering and Serial Bus Decoding
Multiple Interfaces: USB, LAN, HDMI, SCPI Support

UPO2104HD high-resolution oscilloscope

If there's something you'd like to discuss, don't hesitate to contact us.
secure checkout
30 Day return Policy

Specification

Bandwidth: 100 MHz analog channel bandwidth, ideal for education, R&D, and general-purpose applications
Channels: 4 analog channels for simultaneous signal acquisition
Real-time Sample Rate: Up to 2.5 GSa/s for accurate signal reproduction
Memory Depth: Up to 100 Mpts per channel for deep waveform capture
Waveform Capture Rate: Up to 250,000 wfms/s (1,000,000 wfms/s in sequence mode)
Vertical Resolution: 12-bit ADC with support for ERES enhanced resolution up to 16-bit (4-bit improvement)
6-in-1 Instrument Functions:
- High-Resolution Oscilloscope
- Spectrum Analyzer
- Digital Voltmeter (DVM)
- Frequency Meter
- Protocol Analyzer
- Power Analysis
Protocol Triggering & Decoding: RS232/UART, I2C, SPI, CAN, CAN-FD, LIN, FlexRay, AUDIO, SENT
Parameter Measurements: 56 types with histogram and line chart support
Waveform Recording: Real-time hardware recording up to 125,000 frames, with USB export capability
Enhanced FFT: Up to 4 Mpts with features such as frequency setting, marker tracking, detection settings, and waterfall curve
Zone Trigger: Graphically isolate and capture sporadic or complex events
Multi-Window Display: View waveforms, FFT, protocols, and measurements simultaneously
7-digit Frequency Counter: Multi-channel support with refresh rate and digit resolution control
DVM RMS Measurement: Multi-channel RMS readings for DC, AC RMS, and DC+AC RMS signals
Trigger Types: Edge, pulse width, video, ramp, runt, over-amplitude, delay, timeout, duration, setup & hold, Nth edge, and code pattern
Display: 10.1-inch HD capacitive multi-touch screen (1280 × 800) with gesture support (click, slide, zoom, drag, edit)
Display Engine: Ultra Phosphor 3.0 with 256-level gray display for vivid signal rendering
Interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), HDMI
SCPI Support: Compatible with standard SCPI commands for automation and remote control
Embedded WebServer: Browser-based remote access from PC or mobile devices (cross-platform)
Online Firmware Updates: Supports on-line upgrades to ensure continuous feature enhancements

Features

Lower Noise and Enhanced ENOB
- Noise floor: 50mV/div, as low as 800μV at full bandwidth (Typ.)
- ENOB: >7 bits (at full system bandwidth, 50Ω, 50 mV/div, -3dBFS).
- SFDR: ≥ 50dBc (Typ.)
- Low intrinsic jitter: ≤150fs RMS
- High bandwidth precision BNC connector: ＞10GHz.
Jitter Analysis and Eye Diagram
- Jitter Analysis View: Eye Diagram, Trend Chart, Histogram, TIE spectrum, Bath Curve
- Jitter Measurement: TIE, Cycle-Cycle Jitter, Period Jitter, PJ, TJ@BER, RJ, DJ, DDJ, DCD, ISI
PAM-N Analysis
Supports to PAM-3 to PAM-16 signal analysis. Equipped with a 12-bit ADC and delivering over 7 bits of Effective Number of Bits (ENOB) at full bandwidth, it can recover clocks from PAM-N signals with small amplitude differences and perform real-time eye diagram measurements
Protocol Compliance Test
- Supports USB 2.0 and 100/1000 Mbps Ethernet protocol compliance testing.
- Mainstream protocols such as automotive Ethernet, MIPI, and PCIe are being added gradually.
Serial Protocol Analysis
Supports more than 21 protocols
- Embedded serial bus: RS-232/422/485/UART, I2C, SPI, SMBUS, SPMI, AudioBus (I2S, LJ, RJ, TDM)
- Automotive serial bus: CAN, LIN, CAN-FD, SENT, FlexRay, I3C, PSI5
- Computers & Communications: USB2.0, PCIe2.0, Ethernet, NRZ, Manchester, 8b/10b
- Aerospace serial bus: MIL-STD-1553，ARINC 429
MATLAB Embedded Programming
Support MATLAB embedded programming，
Operational results are rendered directly to the oscilloscope window.
Advanced Filter Designer
Supports filter types:
- Butterworth
- Chebyshev Type I
- Chebyshev Type II
- Elliptic
- Sampling method
- Remez
- Window function

Comparison

Model	UPO2204HD	UPO2202HD	UPO2104HD	UPO2102HD	UPO2074HD	UPO2072HD
Bandwidth	200 MHz		100 MHz		70 MHz
Channels	4 Analog	2 Analog	4 Analog	2 Analog	4 Analog	2 Analog
Sample Rate	2.5 GSa/s
Memory Depth	100 Mpts
Capture Rate	1,000,000 wfms/s
Resolution	12-bit (up to 16-bit with ERES)

Accessories For UPO2104HD high-resolution oscilloscope

UT-P20 Passive High voltage probe

Excl. VAT €54,00

Incl. 19% VAT €64,26

Passive probe: (100:1) Bandwidth: 250MHz. voltage: 1500V

Download

Delivery Content

UT-P05 Passive Probe

Excl. VAT €13,00

Incl. 19% VAT €15,47

Probe factor:(10:1) Bandwidth: 200MHz.voltage:600Vpp

Download

Delivery Content

UT-P30 Differential probe

Excl. VAT €379,00

Incl. 19% VAT €451,01

Differential probe:(10:1/100:1) Bandwidth: 100MHz differential voltage: ±800Vpp

Download

Delivery Content

UT-P42 Current probe:DC~150kHz,200A

Excl. VAT €437,00

Incl. 19% VAT €520,03

Current probe,DC-150kHz，0.4A-200A

Download

Delivery Content

UT-V23 High voltage probe

Excl. VAT €24,00

Incl. 19% VAT €28,56

High voltage probe:(100:1)Bandwidth: 100MHz
voltage: 2000Vpp

Download

Delivery Content

UT-P41 Current probe:DC~100kHz,100A

Excl. VAT €567,00

Incl. 19% VAT €674,73

Conversion ratio:100mV/A, 10mV/A, Current range: 50A~100A Frequency: DC~100kHz, voltage: 600Vrms

Download

Delivery Content

UT-P40 Current probe:DC~100kHz,60A

Excl. VAT €430,00

Incl. 19% VAT €511,70

Conversion ratio:50mV/A, 5mV/A, Current range : 0.4A~60A,Frequency: DC~100kHz voltage: 600Vrms

Download

Delivery Content

UT-P33 High voltage differential probe

Excl. VAT €1.396,00

Incl. 19% VAT €1.661,24

Differential probe:(1000:1/100:1) Bandwidth: 70/50 MHz Differential voltage: 14 KVpp

Download

Delivery Content

UT-P32 High voltage differential probe

Excl. VAT €820,00

Incl. 19% VAT €975,80

High voltage differential probe: (10:1/100:1) Bandwidth: 50MHz differential voltage: ±1500Vpp

Download

Delivery Content

UT-P31 High voltage differential probe

Excl. VAT €666,00

Incl. 19% VAT €792,54

High voltage differential probe: (10:1/100:1) Bandwidth: 100MHz differential voltage: ±1500Vpp

Download

Delivery Content

UT-P21 Passive High voltage probe

Excl. VAT €410,00

Incl. 19% VAT €487,90

Passive high voltage probe: (1000:1) Bandwidth: 50MHz voltage: DC 15kVrms/AC 10kV(sine wave )

Download

Delivery Content

UT-P04 Passive Probe

Excl. VAT €11,00

Incl. 19% VAT €13,09

Probe factor:(10:1) Bandwidth: 100MHz.voltage:600Vpp

Download

Delivery Content