Specification

  • Bandwidth: 5 GHz high-resolution mixed signal oscilloscope for advanced signal integrity, high-speed digital, communication, and power electronics applications
  • Analog Channels: 4 analog channels with optional 16 digital channels for comprehensive mixed-signal analysis
  • Sample Rate: Up to 20 GSa/s real-time sampling rate (10 GSa/s in full-channel mode) for accurate capture of high-speed signals
  • Vertical Resolution: 12-bit ADC with ERES enhancement up to 16-bit resolution, delivering superior waveform fidelity and weak signal visibility
  • Memory Depth: Standard 1 Gpts memory depth, expandable to 2 Gpts for long-duration signal acquisition and detailed analysis
  • Waveform Capture Rate: Up to 1,000,000 wfms/s for fast detection of rare and intermittent signal events
  • Low Noise Performance: Ultra-low noise floor and high ENOB performance ensure accurate measurements of small signal details
  • Advanced Triggering: Supports over 22 trigger types including Edge, Pulse Width, Slope, Video, Pattern, Timeout, Runt, Setup & Hold, Delay, Duration, Nth Edge, and Zone Triggering
  • Serial Protocol Analysis: Standard support for RS-232/422/485/UART, I²C, SPI, CAN, and LIN with optional decoding for CAN-FD, FlexRay, SENT, USB 2.0, Ethernet, PCIe, MIL-STD-1553, ARINC429, and more
  • Integrated Instruments: Combines oscilloscope, spectrum analyzer, digital voltmeter, frequency counter, logic analyzer (optional), and arbitrary waveform generator (optional)
  • Spectrum Analysis: Enhanced FFT with up to 1M-point analysis, multiple spectrum views, and advanced signal characterization tools
  • Mathematical Analysis: Supports up to 8 simultaneous math waveforms, advanced filters, user-defined functions, and optional Matlab embedded programming
  • Advanced Measurement Tools: 52 automatic measurements, histogram analysis, trend charts, trace analysis, search and navigation functions
  • Jitter & Eye Diagram Analysis: Optional hardware-accelerated jitter, eye diagram, and PAM-N analysis for high-speed serial communication testing
  • Power Analysis: Optional advanced power analysis including harmonics, inrush current, switching loss, efficiency, SOA, Bode plot, and PSRR testing
  • Display: Large 15.6-inch Full HD capacitive touchscreen (1920 × 1080) with gesture control and dynamic multi-window operation
  • Remote Access: Built-in WebServer enables browser-based remote monitoring and full instrument control from PCs and mobile devices
  • Connectivity: USB Host 3.0, USB Device 3.0, USB Type-C, LAN, HDMI, AUX In/Out, and 10 MHz Reference In/Out interfaces
  • Expandability: Supports optional logic analysis, waveform generator, protocol analysis, conformance testing, and advanced software packages for specialized applications

Features

  • Lower Noise and Enhanced ENOB
    • Noise floor: 50mV/div, as low as 800μV at full bandwidth (Typ.)
    • ENOB: >7 bits (at full system bandwidth, 50Ω, 50 mV/div, -3dBFS).
    • SFDR: ≥ 50dBc (Typ.)
    • Low intrinsic jitter: ≤150fs RMS
    • High bandwidth precision BNC connector: >10GHz.

  • Jitter Analysis and Eye Diagram
    • Jitter Analysis View: Eye Diagram, Trend Chart, Histogram, TIE spectrum, Bath Curve
    • Jitter Measurement: TIE, Cycle-Cycle Jitter, Period Jitter, PJ, TJ@BER, RJ, DJ, DDJ, DCD, ISI

  • PAM-N Analysis

    Supports to PAM-3 to PAM-16 signal analysis. Equipped with a 12-bit ADC and delivering over 7 bits of Effective Number of Bits (ENOB) at full bandwidth, it can recover clocks from PAM-N signals with small amplitude differences and perform real-time eye diagram measurements

  • Protocol Compliance Test
    • Supports USB 2.0 and 100/1000 Mbps Ethernet protocol compliance testing.
    • Mainstream protocols such as automotive Ethernet, MIPI, and PCIe are being added gradually.

  • Serial Protocol Analysis

    Supports more than 21 protocols

    • Embedded serial bus: RS-232/422/485/UART, I2C, SPI, SMBUS, SPMI, AudioBus (I2S, LJ, RJ, TDM)
    • Automotive serial bus: CAN, LIN, CAN-FD, SENT, FlexRay, I3C, PSI5
    • Computers & Communications: USB2.0, PCIe2.0, Ethernet, NRZ, Manchester, 8b/10b
    • Aerospace serial bus: MIL-STD-1553,ARINC 429

  • MATLAB Embedded Programming

    Support MATLAB embedded programming,
    Operational results are rendered directly to the oscilloscope window.

  • Advanced Filter Designer

    Supports filter types:

    • Butterworth
    • Chebyshev Type I
    • Chebyshev Type II
    • Elliptic
    • Sampling method
    • Remez
    • Window function

Related Document

User Manual
Datasheet
Quick Start Guide
Programming Manual
Software and Firmware Download

Customer Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customers also bought