files/UPO2000HD2.png
files/UPO2000HD1.png
files/UPO2000HD3.png

UPO2074HD high-resolution oscilloscope

Variants

Excl. VAT: Excl. VAT €935,00

Bandwidth: 70 MHz
Channels: 4 Analog
Real-Time Sample Rate: 2.5 GSa/s
Memory Depth: 100 Mpts
Waveform Capture Rate: 1,000,000 wfms/s
High Vertical Resolution: 12-bit ADC
Large Touchscreen Display with Intuitive UI
Advanced Triggering and Serial Bus Decoding
Multiple Interfaces: USB, LAN, HDMI, SCPI Support

Quantity

UPO2074HD high-resolution oscilloscope

If there's something you'd like to discuss, don't hesitate to contact us.
secure checkout
30 Day return Policy

Specification

Bandwidth: 70 MHz analog channel bandwidth, suitable for entry-level high-resolution signal analysis
Channels: 4 analog channels
Real-time Sample Rate: Up to 2.5 GSa/s for accurate waveform capture
Memory Depth: Up to 100 Mpts per channel for long waveform acquisition and deep analysis
Waveform Capture Rate: Up to 250,000 wfms/s (1,000,000 wfms/s in sequence mode)
Vertical Resolution: 12-bit ADC with Enhanced Resolution (ERES) up to 16-bit (4-bit improvement)
Display Technology: Ultra Phosphor 3.0 with 256-level grayscale for smooth and vivid waveform visualization
Integrated 6-in-1 Instrument Functions:
- High-Resolution Oscilloscope
- Spectrum Analyzer
- Digital Voltmeter (DVM)
- Frequency Meter
- Protocol Analyzer
- Power Analyzer
Protocol Triggering & Decoding: RS232/UART, I2C, SPI, CAN, CAN-FD, LIN, FlexRay, AUDIO, SENT
Parameter Measurements: 56 types with support for histogram and trend chart display
Waveform Recording: Uninterrupted real-time hardware recording of up to 125,000 frames with USB export functionality
Enhanced FFT: Up to 4 Mpts with frequency setting, waterfall view, detection settings, and marker tracking
Zone Trigger: Enables visual selection of waveform areas to isolate sporadic or complex signals
Trigger Types: Edge, pulse width, video, ramp, runt pulse, over-amplitude, delay, timeout, duration, setup & hold, Nth edge, and code pattern
Multi-Window Display: Allows simultaneous viewing of waveform, FFT, protocol decode, and measurements
Frequency Counter: Multi-channel 7-digit hardware frequency meter with adjustable refresh rate and digit precision
DVM RMS Measurements: DC, AC RMS, and DC+AC RMS for multichannel inputs
Touchscreen Display: 10.1-inch 1280×800 HD capacitive screen with gesture support (click, slide, zoom, drag, edit)
Connectivity Interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), HDMI
SCPI Support: Fully compatible with SCPI commands for automated testing and integration
Built-in WebServer: Browser-based access and control from PC or mobile for cross-platform usability
Online Updates: Supports online firmware updates for continuous improvements and feature upgrades

Features

Lower Noise and Enhanced ENOB
Versatile Testing Equipment-
- Oscilloscopes
- Spectrum Analyzer
- Protocol Analyzer
- Power Analyzer
- High Precision Frequency Counter
- Digital Voltmeter
2D Infinite Zoom
Clear Horizontal and Vertical resolution
Ultra Phosphor 3.0
Supports 8-channel parallel graph mapping, the processing rate is up to 20 Gbps, the waveform capture rate is up to 250,000 wfms/s, and up to 1,000,000 wfms/s in the sequence mode.
56 types: Measurement, Statistics, Trend Graphs
56 types of precise parameter automatic measurements covering multiple dimensions such as voltage, frequency, phase, and power. It also integrates advanced parameter statistics and trend graph visualization analysis functions, providing a comprehensive and multi-dimensional display of signal characteristic changes, achieving professional-level deep insights and efficient data interpretation.
Protocol Decoding And Triggering
Supports 9 types of mainstream protocols, including
- Embedded: UART, I2C, SPI
- Automobile: CAN, CAN-FD, LIN, FlexRay, SENT
- Audio
Spectrum Analyzer
- Standard enhanced FFT with up to 4 Mpts for 4-channel signal analysis
- Frequency range: 0 to 1.25 GHz
- Waterfall curve
- 4 traces and 4 detections
- Mark type: Auto, manual, and threshold
- Marker point list
Power Analysis
Input Analysis
- Power Quality
- Harmonic Analysis
- Inrush Current
- Switching Analysis
- Switching Loss
- Safe Operating Area (SOA)
- Slew Rate
- Rds (on)
- Modulation Analysi
- Output Analysis
- Ripple Analysis
- Power Efficiency
- Transient response
- ON/OFF time
Hardware-accelerated mask testing: 6σ standard < 1s
The 6σ (Six Sigma) standard for electronic signals is a process with a defect rate of no more than 3.4 defects per million opportunities (DPMO). This means there are only 3.4 anomalies per 1,000,000 samples. With its ultra-high hardware capture rate, the hardware-accelerated template testing maintains the full capture rate of Ultra Phosphor 3.0, completing waveform tests that meet specific standards within 1 second (instead of several hours).

Comparison

Model	UPO2204HD	UPO2202HD	UPO2104HD	UPO2102HD	UPO2074HD	UPO2072HD
Bandwidth	200 MHz		100 MHz		70 MHz
Channels	4 Analog	2 Analog	4 Analog	2 Analog	4 Analog	2 Analog
Sample Rate	2.5 GSa/s
Memory Depth	100 Mpts
Capture Rate	1,000,000 wfms/s
Resolution	12-bit (up to 16-bit with ERES)

Accessories For UPO2074HD high-resolution oscilloscope

UT-P20 Passive High voltage probe

Excl. VAT €54,00

Incl. 19% VAT €64,26

Passive probe: (100:1) Bandwidth: 250MHz. voltage: 1500V

Download

Delivery Content

UT-P05 Passive Probe

Excl. VAT €13,00

Incl. 19% VAT €15,47

Probe factor:(10:1) Bandwidth: 200MHz.voltage:600Vpp

Download

Delivery Content

UT-P42 Current probe:DC~150kHz,200A

Excl. VAT €437,00

Incl. 19% VAT €520,03

Current probe,DC-150kHz，0.4A-200A

Download

Delivery Content

UT-P30 Differential probe

Excl. VAT €379,00

Incl. 19% VAT €451,01

Differential probe:(10:1/100:1) Bandwidth: 100MHz differential voltage: ±800Vpp

Download

Delivery Content

UT-P40 Current probe:DC~100kHz,60A

Excl. VAT €430,00

Incl. 19% VAT €511,70

Conversion ratio:50mV/A, 5mV/A, Current range : 0.4A~60A,Frequency: DC~100kHz voltage: 600Vrms

Download

Delivery Content

UT-V23 High voltage probe

Excl. VAT €24,00

Incl. 19% VAT €28,56

High voltage probe:(100:1)Bandwidth: 100MHz
voltage: 2000Vpp

Download

Delivery Content

UT-PA2000 active differential probe

Excl. VAT €2.375,00

Incl. 19% VAT €2.826,25

2GHz bandwidth, 10:1 attenuation ratio, ±4V dynamic range Single-ended active probe

Download

Delivery Content

UT-PA1000 active differential probe

Excl. VAT €1.235,00

Incl. 19% VAT €1.469,65

1GHz bandwidth, 10:1 attenuation ratio, ±4V dynamic range Single-ended active probe

Download

Delivery Content

UT-PD1500 active differential probe

Excl. VAT €2.429,00

Incl. 19% VAT €2.890,51

UT-PD1500 is a 1.5 GHz active differential probe with ±4V dynamic range and 10:1 attenuation, ideal for high-speed signal testing, oscilloscopes, and precision measurements.

Download

Delivery Content

UT-PD2500 active differential probe

Excl. VAT €3.240,00

Incl. 19% VAT €3.855,60

UT-PD2500 is a 2.5 GHz active differential probe with wide dynamic range and low noise, ideal for high-speed signal testing, oscilloscopes, and advanced debugging.

Download

Delivery Content

UT-P41 Current probe:DC~100kHz,100A

Excl. VAT €567,00

Incl. 19% VAT €674,73

Conversion ratio:100mV/A, 10mV/A, Current range: 50A~100A Frequency: DC~100kHz, voltage: 600Vrms

Download

Delivery Content

UT-P33 High voltage differential probe

Excl. VAT €1.396,00

Incl. 19% VAT €1.661,24

Differential probe:(1000:1/100:1) Bandwidth: 70/50 MHz Differential voltage: 14 KVpp

Download

Delivery Content